Explore production, testing and delivery references across storage, gas generation and modular energy infrastructure. Choose the equipment you need to see its manufacturing scope and project interfaces.
Choose from gas storage and processing, generation, battery storage, controls, cooling and modular data-center infrastructure.
Explore the manufacturing review behind tank containers and gas storage or transport equipment: the service specification, applicable design requirements, fabrication records and delivery interfaces.
Explore the factory review route →Factory profile · Under developmentFollow the review path from feed-gas conditions and process design to packaged equipment, controls, factory checks and the interfaces that need completion at the project site.
Explore the factory review route →Factory profile · Under developmentExplore the package behind modular gas generation: the chosen engine and alternator, enclosure or skid, fuel interfaces, cooling, controls, protection and acceptance checks.
Explore the factory review route →Factory profile · Under developmentSee production-facility, charge-and-discharge testing and delivery images from existing CIMC storage material. Explore the enclosure, battery, PCS, cooling and control integration scope.
Explore the factory review route →Factory profile · Under developmentUnderstand the control layer of an energy system: power conversion, battery supervision, site dispatch, communication interfaces and the tests that connect those parts.
Explore the factory review route →Factory profile · Under developmentReview how cooling equipment, pumps, heat exchange, piping, electrical distribution and controls can be packaged for delivery and connected to the project's heat-rejection and power systems.
Explore the factory review route →Factory profile · Under developmentBring the previous routes together: factory-built data-center modules, power interfaces, generation, cooling and controls, with an explicit plan for the work that remains at the site.
Explore the factory review route →Factory profile · Under developmentCIMC Enric manufacturing capability
Confirm the medium, operating conditions, transport route and applicable project requirements.
Agree vessel, insulation where applicable, frame, connections and inspection responsibilities.
Discuss material traceability, welding records and assembly checkpoints for the selected equipment.
Specify the applicable inspections and pressure or leak checks in the order-specific test plan.
Review documentation, lifting points, transport preparation and receiving inspection.
CIMC Enric engineering and equipment capability
Review gas composition, contaminants, flow variation, pressure and the required product specification.
Confirm process boundaries, utilities, equipment selection and the division between factory and site work.
Discuss skids, vessels, piping, instrumentation and control integration for the agreed package.
Define component inspections, interface checks and tests that can be completed before shipment.
Prepare utilities, foundations, tie-ins, commissioning responsibilities and operator handover.
Packaged equipment and system integration
Confirm the load profile, run hours, gas quality, supply pressure, ambient conditions and electrical requirements.
Agree the engine, alternator, enclosure, cooling arrangement, auxiliaries and supplier responsibilities.
Check fuel, exhaust, ventilation, wiring, control and protection interfaces against the selected design.
Define the available load testing, operating checks, protection verification and witness arrangements.
Confirm foundations, unloading, fuel and electrical tie-ins, commissioning and service responsibilities.
CIMC storage manufacturing network
Separate power in kW from energy in kWh, then agree voltage, operating modes, ambient conditions and system boundaries.
Identify battery, PCS, enclosure, cooling, fire-protection and control suppliers for the selected configuration.
Discuss mechanical fit, electrical wiring, thermal management, safety interfaces and component traceability.
Define the relevant charge-and-discharge, alarms, interlocks, control and interface checks in the test plan.
Review transport conditions, installation work, receiving checks, site integration and final handover.
Supplier technology and system integration
Agree grid-connected, backup or islanded requirements and which device manages each control function.
Confirm PCS, battery BMS and EMS models, supported protocols and supplier ownership of each product.
Discuss protection settings, communication mapping, access permissions, setpoints and firmware versions.
Agree checks for alarms, interlocks, dispatch commands and interaction with generation or the grid.
Confirm parameter records, operating guidance, remote-support boundaries and change-management responsibilities.
CIMC Digital Power published reference and project suppliers
Agree cooling demand, ambient conditions, water or fluid conditions, redundancy and the heat-rejection route.
Identify the chiller, pump and heat-exchanger suppliers and define the module integration scope.
Discuss piping, electrical wiring, mechanical access, instrumentation and control integration.
Define the checks and performance demonstrations available under the factory test conditions.
Confirm utility interfaces, external pipework, final balancing, commissioning and ongoing service.
CIMC Digital Power published capability
Agree the IT load, layout, power and cooling basis, redundancy and project delivery boundaries.
Review structural, electrical, mechanical and control interfaces and the division between factory and site work.
Discuss module assembly, equipment access, internal interfaces and the agreed inspection checkpoints.
Define the factory checks, witness scope and demonstrations that require later site conditions.
Plan civil work, utility tie-ins, module connections, system-level commissioning and operational handover.
See the production facility, charge-and-discharge testing area and systems prepared for delivery. Explore the selected battery, PCS, enclosure, cooling and controls in the storage route.
Sources: existing CIMC storage material and AM-series references. View manufacturing-network references →